AEPR01 digital electronic ratio regulator adopts advanced technology microprocessor, fast response speed, excellent performance and strong anti-interference. LCD display and touch keyboard for easy setting of operating parameters.
Insensitive to sunlight, infrared and light.
The flame signal line is protected against interference and short circuits.
Wide range of ambient temperature adaptation,-40~80°C.
It is used for flame detection of various atmospheric burners and flame retardant wind burners.
It is not sensitive to sunlight, infrared and light. This type of probe induction bulb adopts imported bulb, which has high sensitivity and long detection distance.
Protection against interference and short circuit in the flame signal line
Wide range of environmental temperature adaptation,-40~80°C.· Applied to flame detection of various atmospheric burners and flame retardant air burners
It is not sensitive to sunlight, infrared and light. This type of probe induction bulb adopts imported bulb, which has high sensitivity and long detection distance.
Protection against interference and short circuit in the flame signal line
Wide range of ambient temperature,-40~80°C.
Applied to all kinds of atmospheric burner, flame retardant air burner flame detection
AFW15-T is a highly sensitive flame detector. The flame monitor is used by connecting with the flame sensor (such as UV probe and ion electrode). After the flame monitor is energized, it will enter the flame detection state immediately. If a flame is detected in the combustion device, the weak signal from the flame sensor will be amplified through the internal signal amplification circuit to drive the relay.
AT-08 is a high-energy ignition transformer, reliable ignition. It is suitable for combustion devices such as integrated combustion machine, radiant tube burner, high-speed burner, industrial furnace, etc. It can point gas such as natural gas, coke oven gas, blast furnace gas, etc. It has the characteristics of large ignition energy, longer ignition time, stable and reliable work, etc.
AIC11 is a high-energy electronic ignition transformer, open flame type arc, reliable ignition. It is suitable for integrated combustion machine, radiant tube burner, high-speed burner, industrial furnace and other combustion devices to point gas such as natural gas, coke oven gas, blast furnace gas, fuel oil, etc., with large ignition energy, longer ignition time, stable and reliable work, etc.
It has automatic ignition control, flame detection indication, flameout protection, fault alarm indication remote reset, large and small fire combustion control, over-temperature alarm and other functions.
There is no built-in ignition transformer, and any ignition transformer with power less than 100W can be connected. There is no secondary ignition when flameout, and the flameout will give an alarm immediately.
And has a strong anti-interference function, can work under strong frequency interference.
It has many functions such as remote ignition, flame detection, flameout protection, fault alarm, fault lock, large and small fire combustion control, etc.
Built-in ignition high-voltage package, ignition spark up to 8mm.
The use of switching power supply technology, wide working voltage range, high efficiency, strong anti-interference ability, digital tube display, visual display of the controller's working status and fault code, so as to facilitate troubleshooting.
It has many functions such as automatic ignition, flame detection indication, flameout protection, I fault alarm indication, large and small fire combustion control, etc.
The longest ignition spark can reach 1cm, the longest in its class. And has a strong anti-interference function, can work under strong frequency interference.
It adopts the way of plug-in base, easy to install and use, compact structure and built-in ignition transformer to realize the integration of flame detection and ignition control.
ACU460/ACU480 is an intelligent combustion controller, using advanced intelligent control chip, reliable industrial grade components, strong anti-interference. It has the functions of burner ignition control, flame monitoring, air pressure monitoring, high temperature mode, purge control, gas valve control, air valve control, etc. The ignition transformer is built into the controller to form an integrated combustion controller, which can replace the local control cabinet. Three flame monitoring modes: single electrode, double electrode and UV probe; Digital tube display can display working state, flame signal current value and fault code; It can detect current flame signals as low as 2uA, can be applied to intermittent work or continuous work burner control system. Among them, ACU460 is a basic combustion controller, does not have communication function; ACU480 is a bus type combustion controller, with communication function, Profibus-DP, ProfiNET communication optional.
It has automatic ignition, flame detection indication, flameout protection, fault alarm indication, large and small fire combustion control, remote reset, remote ignition control and other functions.
It has strong anti-interference function and can work under strong frequency conversion interference.
Using the way of plug-in base, easy to install and use.
AFS258 combustion controller adopts advanced intelligent control chip, intuitive digital tube display, reliable industrial components, strong anti-interference. The ignition transformer is built into the controller to form an integrated combustion controller, which can replace the local control cabinet
AMF01 multi-channel flame monitor is a 12-channel flame signal input, which can monitor the combustion state of 12 burners at the same time. A switch value alarm signal output will be generated when a certain channel is turned off, and the corresponding channel indicator light will light up. The 12 inputs are divided into group a and group B. group a contains 1 to 6 channels, group B contains 7 to 8 channels, group a corresponds to output alarm 1, and group B corresponds to output alarm 2. Channels that are not used can be set by internal dips to avoid alarms.
AT50 electric actuator is used to drive all occasions of 0-90 ° rotation action, such as driving butterfly valve, linear valve and other valves, used to automatically adjust the gas or air flow. Two cams (N1 and N2) of the actuator are used to adjust the opening. N1 adjusts the minimum angle and N2 adjusts the maximum angle. There are three control modes: three-point control, analog control and two-point control. Three-point control and analog control are suitable for continuous control applications, while two-point control is suitable for on/off or large/small fire pulse control.
AT31 electric actuator for driving 0-90 ° rotary action in all occasions such as drive butterfly valve, linear valve and other valves, used to automatically adjust the gas or air flow. Two cams (N1 and N2) of the actuator are used to adjust the opening. N1 adjusts the minimum angle and N2 adjusts the maximum angle. There are three control modes: three-point control, analog control and two-point control. Three-point control and analog control are suitable for continuous control applications, while two-point control is suitable for on/off or large/small fire pulse control.
Contact Information
Fax: 86-757-28331556
E-mail: astechnic@acombustion.com
Address: Building 13, Liandong International Enterprise Port, Lecong Town, Shunde District, Foshan City, Guangdong Province
Contact for consultation
Public Number
WeChat customer service