AVP series combined burner uses a mechanical proportional adjustment device to achieve stable and clean combustion. The fuel can be natural gas and liquefied petroleum gas, and the load adjustment signal can be three-wire motor valve and 4-20mA. Air gas control devices and ignition and detection devices are all adopted by the state.
International well-known brand products.
AVP series combined burner uses a mechanical proportional adjustment device to achieve stable and clean combustion. The fuel can be natural gas and liquefied petroleum gas, and the load adjustment signal can be three-wire motor valve and 4-20mA. The air gas control device and ignition, detection device, etc. use international famous brand products.
ADZ series low-temperature burner is mainly a product developed for drying equipment with low temperature and large flue gas volume. It can work stably under the conditions of large negative pressure and zero pressure furnace, with large flue gas volume and high temperature. The product adopts double solenoid valve safety protection, wind pressure monitoring, combustion machine controller with purging function and ion bar with flame detection is stable and reliable.
ADZ series low-temperature burner is mainly a product developed for drying equipment with low temperature and large flue gas volume. It can work stably under the conditions of large negative pressure and zero pressure furnace, with large flue gas volume and high temperature. The product adopts double solenoid valve safety protection, wind pressure monitoring, combustion machine controller with purging function and ion bar with flame detection is stable and reliable.
The ACM burner is a linear burner suitable for producing large quantities of clean, high temperature air. This burner is equipped with an integrated combustion air fan, which is installed on the housing of the burner. The blower provides proper air volume and pressure to the burner, so that the burner can operate stably in a wide range of air duct speed, without the need to install a wind deflector around the burner.
The AFD258 controller is an intelligent flame controller with the following features:
Advanced intelligent control chip, intuitive digital tube display, reliable industrial components, strong anti-interference.
External ignition transformer, can be applied to a variety of power intermittent work or continuous work burner control system
Applicable single electrode, double electrode and ultraviolet probe three flame detection methods.
Can detect the flame current signal as low as 1uA, flame detection current threshold value can be set
Flame stabilization time can be set.
The number of key fires can be set.
The controller operating status, fault code and flame signal strength can be displayed.
AFD258 is divided into two versions: one is the basic type and the other is the bus type (Modbus RTU protocol)
Can be used as a slave to communicate with the host computer.
Suitable for all applications that require precise control of 0 ° to 90 · rotational motion. If the power is disconnected, the actuator stops at the current position.
The combined design of actuator AC 20 and control element to adjust the gas volume of various burners and flue gas pipes.
The AC20 actuator and butterfly valve combination is designed to control up to 10:1 gas (including cold and hot air)
The AC20 actuators and linear flow controllers are designed to control up to a 25:1 ratio for gas and cold air. This function is only within the prescribed limits
Contact Information
Fax: 86-757-28331556
E-mail: astechnic@acombustion.com
Address: Building 13, Liandong International Enterprise Port, Lecong Town, Shunde District, Foshan City, Guangdong Province
Contact for consultation
Public Number
WeChat customer service